worm reduction

Our standard 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over 10 years. Its proven modular design has set the industry standard for functionality and is the most imitated item in the current worm gear acceleration reducer market. But why accept a knock-off when you're able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow Worm Reducer output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series' large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series' rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series' high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series' super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes possess earned a reputation to be a business benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are inexpensive prices. High flexibility accorded through a broad choice of mounting options, shaft configurations and electric motor interfaces, makes the Ever-Power worm gearbox the default choice for the sector. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being basic and compact in style, these gears can perform higher gear ratio compared to the helical gears. These worm decrease gears having screw type qualities act like helical gears, but its helix angle is typically comparatively bigger) and its body is generally quite lengthy in the axial path. The gears in these gearboxes could be right or left-handed dependant on the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is certainly shaped like a screw and the worm wheel can be a kind of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is comparable with that of a bolt and nut. The principle is the same as a nut that has been fixed to ensure that it cannot rotate and therefore progresses in the axial path when the bolt is definitely turned.
The look of a worm gear is thought of through the relationship between your rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. For this reason, in a 1 speed decrease gears, the wheel can be manufactured therefore that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature can help you layout the turning transmitting direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw path.
A wide variety of shaft layouts The wide variety of shaft layouts is among the features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Body 2) and, if attachment orientations are included, it is possible to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is characteristic because the contact is certainly linear and the relative slide is excellent. In comparison to rolling power transmission, noise and vibration are really low. Because of this, this technology can be used to drive medical equipment, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in essential areas such as selecting the strain index, calculating the overhang load and examining heat rated capacity from the manufacturer.
Cautions during use
When using a worm decrease gears, the heat produced through the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to improve the lubricating oil and also to change the lubricating oil after that about 1 time each year according to the operation manual supplied by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of high-quality. Our products are made through the use of premium quality material and enhance technology at our vendors end. They are widely used in a variety of sectors. Our products are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Frame, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Attach.
High efficiency and secure operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is given by the wide selection of several mounting options, shaft configurations and motor interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, having a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) provides great versatility to suit a broad range of applications and higher efficiency than the compact collection XC, where in fact the emphasis is on space effectiveness.
Series H offers the same features because series X with an extra plus: a spur equipment pre-stage at the input end provides higher efficiency and a broader selection of ratios than the X series.
Body sizes 110 and 90 feature a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of options available:
second input, result flange, single or double extension result shaft, torque limiter with through cable, torque arm.