Split Taper Bushing

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that's built for durability and strength. U1 bushings are being used in an extensively broad range of applications, including; sprockets, shaves, pulleys, gears, and much more, we as well offer most of these items. What units this bushing apart may be the high-quality steel construction along with exact manufacturing and top quality control; this ensures that you always get yourself a premium quality constant product. What really models us apart from the other fellas is our experienced expert workers and our company-wide goal of customer satisfaction.
1. Be certain the tapered cone surfaces of the bushing and the within of the driven product are clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or additional portion type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to Split Taper Bushing china assure sliding fit on shaft.
4. With crucial on shaft, slide the sprocket or other portion type to the required placement on the shaft. Make sure to keep the heads of the cap screws accessible.
5. Align the sprocket or component type, tighten the screws on the other hand and progressively until they will be pulled up tight. Do not apply extensions on the wrench handles , nor permit the sprocket or part to end up being drawn i connection with flange of bushing. At this point there should be a gap between your bushing flange and sprocket, make certain this gap does not close.
Twice split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key on most sizes for confident drive and higher torque carrying capabilities
Double-split barrel for great clamping
Solid flange to maintain concentric bores
Available in inches, metric, and spline bores. Bore range from 3/8″ to 10″

Key to Key Travel – With keys on both the shaft and product to provide the strongest possible travel.
3/4″ per Foot Taper on Barrel – Personal locking taper provides the highest degree of mechanical locking merchandise to product.

Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered resources with superb tolerance. The feature is easy to use and needs no further alteration. These bushings can go well with almost all types of assemblies and sizes. They are the best choice in style for mechanical connections.
To complete designations add bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total range of both metric and imperial readily available.


Ease of installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and can be purchased on a single page as the pulley you need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.