gearbox for agricultural machinery

Agricultural Gearbox
The agricultural gearbox is the primary mechanical component of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque can also be transmitted to the gearbox by hydraulic gearbox for agricultural machinery motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes always have 1 input shaft and at least a single output shaft. If these shafts sit at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or more generally called a right-angle gearbox.

rotary tiller gearbox is adopted middle equipment transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely protected after tillage as the working width is a lot wider. The quality is reliable and the efficiency is well. So it can be utilized on dry and paddy field. It can decrease the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have the two gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the one with the insight shaft, gets the fewer number of teeth (pinion), therefore the result shaft rotates slower than the input shaft.
It is named an increaser when the insight shaft is mounted on the gear with the larger quantity of teeth (crown), therefore the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it is called a distributor whenever there are at least two output shafts.
It is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes may also have other gears with a different amount of teeth. The gear shift of the primary couple of gears with the secondary ones enables different speeds. The manual change of the secondary gear set with gears with different amount of teeth allows modifications to the output rotation speed.
CMR GROUP has the capacity to design and manufacture also agricultural machinery applications.